photo ic for optical switch analog output photo ic for optical switch S11049-02SB www.hamamatsu.com 1 the S11049-02SB photo ic is designed for optical switches and provides an analog waveform output proportional to the intensity of incident pulsed light. features applications large allowable background light level: 4000 lx min. high linearity low noise: 1.8 mv rms max. optical switch optical receivers in various sensor devices absolute maximum ratings (ta=25 c) electrical and optical characteristics (ta=25 c, vcc=5.0 v) parameter symbol value unit supply voltage vcc -0.5 to +7 v power dissipation * 1 p 250 mw output voltage vout -0.5 to +7 v operating temperature topr -25 to +85 c storage temperature tstg -40 to +100 c soldering - 230 c, 5 s - * 1: power dissipation decreases at a rate of 3.3 mw/c above ta=25 c parameter symbol condition min. typ. max. unit spectral response range - 380 to 1120 - nm peak sensitivity wavelength p - 760 - nm supply voltage vcc 4.5 - 5.5 v current consumption icc - - 2.2 ma photo sensitivity a =950 nm * 2 input signal=100 khz including diffused re ection inside package 120 200 300 v/mw ac photoelectric sensitivity linearity alin input pulse signal 0.01 w to 4.0 w * 2 -10 - +10 % input pulse signal 4.0 w to 7.5 w * 2 -50 - +50 cut-off frequency low band fc * 2 --50 khz high band 1250 1450 1650 allowable background light level * 3 pdc input pulse signal 2.5 w * 2 4000 6000 - lx output noise voltage (with no input) von * 2 - - 1.8 mv rms * 2: measurement circuit (waveform at terminal vo is measured) * 3: this is defined as the background light level in the active area at witch the photo ic sensitivity drops by 20% kpicc0161eb 5 v vo 0.1 f 0.01 f 5.1 k 3.3 k vcc out gnd
cat. no. kpic0175e02 mar. 2010 dn photo ic for optical switch S11049-02SB www.hamamatsu.com information furnished by hamamatsu is believed to be reliable. however, no responsibility is assumed for possible inaccuracies or omissions. specifications are subject to change without notice. no patent rights are granted to any of the circuits described herein. type numbers of products listed in the specification sheets or supplied as samples may have a suffix ?(x)? which means tentativ e specifications or a suffix ?(z)? which means developmental specifications. ?2010 hamamatsu photonics k.k. hamamatsu photonics k.k., solid state division 1126-1 ichino-cho, higashi-ku, hamamatsu city, 435-8558 japan, telephone: (81) 53-434-3311, fax: (81) 53-434-5184 u.s.a.: hamamatsu corporation: 360 foothill road, p.o.box 6910, bridgewater, n.j. 08807-0910, u.s.a., telephone: (1) 908-231-0 960, fax: (1) 908-231-1218 germany: hamamatsu photonics deutschland gmbh: arzbergerstr. 10, d-82211 herrsching am ammersee, germany, telephone: (49) 8152- 375-0, fax: (49) 8152-265-8 france: hamamatsu photonics france s.a.r.l.: 19, rue du saule trapu, parc du moulin de massy, 91882 massy cedex, france, teleph one: 33-(1) 69 53 71 00, fax: 33-(1) 69 53 71 10 united kingdom: hamamatsu photonics uk limited: 2 howard court, 10 tewin road, welwyn garden city, hertfordshire al7 1bw, unit ed kingdom, telephone: (44) 1707-294888, fax: (44) 1707-325777 north europe: hamamatsu photonics norden ab: smidesv?gen 12, se-171 41 solna, sweden, telephone: (46) 8-509-031-00, fax: (46) 8 -509-031-01 italy: hamamatsu photonics italia s.r.l.: strada della moia, 1/e, 20020 arese, (milano), italy, telephone: (39) 02-935-81-733, fax: (39) 02-935-81-741 2 block diagram dimensional outline (unit: mm) spectral response (measurement example) kpicc0162eb kpicb0142ea kpica0083ea preamp buffer vcc out gnd photodiode 20 40 60 80 100 0 400 600 800 1000 1200 wavelength (nm) relative sensitivity (%) (ta=25 c) tolerance unless otherwise noted: 0.1, 2 shaded area indicates burr. values in parentheses are not guaranteed, but for reference. lead surface finish: silver plating packing: polyethylene pack [anti-static type] (200 pcs/pack) gnd vout vcc gnd 2.5 0.2 5.0 1.0 2.0 5.0 16.5 1.0 (1.0) (0.8) 1.27 10 5 1.27 (specified at the lead root) 1.27 0.25 -0.1 +0.15 0.45 5.2 0.2 (including burr) 5.2 0.2 (including burr) 0.7 10 5 active area 1.1 0.8 1.2 depth 0.15 max.
|
